SOUTHERN WISCONSIN’S
SOURCE FOR
HIGH QUALITY
POWDER COATED TOUGH
FINISHING
 

BATCH SYSTEM

All-Color Powder Coating, Inc. also offers a state-of-the-art batch powder coating sytem. Our batch line was installed in 2005 and is used mainly for low volume parts and larger items like patio furniture and railings. Our batch line can handle a maximum part size that is 7 feet 6 inches high x 7 feet 6 inches wide and 20 feet long. Your parts will be cleaned with a high pressure spray wand that uses a cleaner phosphate combination and a R.O. water rinse. After drying, the parts will be sprayed using manual Wagner electrostatic guns in the color of your choice. Once the powder is applied, your part will move into the gas convection dry-off/cure oven to be cured per the powder coating manufacturers specifications.

 
HOME
 

FACILITY

Automated Lines

Batch System

Sand Stripping

 
CONTACT US
  © 2008 All-Color Powder Coating, Inc.
298 North Burr Oak Ave.
Oregon, WI 53575

Phone: 608-835-9118     Fax: 608-835-7671
allcolorpowdercoating.com